AUDIOLINE WAVE 10X Informações Técnicas descarregar pdf (Página 61)

6. If you installed an ISA legacy adapter, go to “ISA

Legacy Resources” on page 27 to assign system

resources.

7. If you want to install or remove any other options, do

so now. Otherwise, go to “Completing the

Installation” on page 56.

Administrator Password Switch

When you want to set, change, or delete an administrator

password that is protected by enhanced security, you must

first unlock the administrator password. To do this, change

the setting of the administrator password switch from

Locked to Unlocked.

1. Locate the configuration switches on the system

board. For more information, refer to the label inside

the server, or see “System Board” on page 96.

2. To lock or unlock the administrator password, set

switch 7 as shown in the following illustration. It

might be helpful to use the end of a small screwdriver

to set the switch.

Administrator Password Locked Administrator Password Unlocked

12345678 12345678

ON ON

OFF OFF

3. Move the switch to the ON position.

Note: You must know the administrator password to

change or delete it.

4. Set, change, or delete the password.

5. Move the switch back to the OFF position.

6. Replace the cover. Then, turn on the server.

7. After changing configuration switch settings, you must

reconfigure the server. After reassembling the server

(see “Completing the Installation” on page 56), use

the Configuration/Setup Utility program to set a new

administrator password and reconfigure the server.

For more information, see “Configuration/Setup Utility

Program Menus” on page 19.

IBM Netfinity 3500 - Type 8644

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 151 152

Sem comentários

AUDIOLINE WAVE 10X Informações Técnicas Página 61