
3. To access bays 1 through 4:
a. If the drive that you are installing has removable
media, remove the bay panel from the drive bay
by using a flat-blade screwdriver to pry the tab
on the left edge of the panel, as shown.
b. Remove the top cover by using a flat-blade
screwdriver to release the tab on the left edge,
as shown.
c. Disconnect the power and signal cables attached
to the drives in the upper drive bracket.
Note
If an additional cable (audio) is connected to
the CD-ROM drive, also disconnect that
cable.
IBM Netfinity 3500 - Type 8644 71
Comentários a estes Manuais